cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
163
Views
10
Helpful
2
Replies
antonyxvr88
Beginner

Radius server | Cisco L3 (CAT9K_IOSXE)

Hi There,

 

>>> Below is the output of Radius server working switch and non working switch the difference is host name ABCD and EFGH mentioned in the working switch.  Please let me the how to steps to configure this.

 

Working switch.:

===============

 

SW01#show radius server-group all
Server group radius
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813,ABCD) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813,EFGH) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server group NPS_RADIUS_SERVERS
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813,ABCD) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813,EFGH) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE

 

Non working switch:

==================

 

SW01#show radius server-group all
Server group radius
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server group NPS_RADIUS_SERVERS
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE

2 REPLIES 2
balaji.bandi
VIP Expert

Can you post both the device show version ? and SNMP config ?



BB


*** Rate All Helpful Responses ***

The original post gives us the output of show radius server-group. I believe that it would be helpful if we could see the output of the appropriate parts of show run from both devices.

HTH

Rick