cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
496
Views
10
Helpful
2
Replies

Radius server | Cisco L3 (CAT9K_IOSXE)

antonyxvr88
Level 1
Level 1

Hi There,

 

>>> Below is the output of Radius server working switch and non working switch the difference is host name ABCD and EFGH mentioned in the working switch.  Please let me the how to steps to configure this.

 

Working switch.:

===============

 

SW01#show radius server-group all
Server group radius
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813,ABCD) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813,EFGH) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server group NPS_RADIUS_SERVERS
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813,ABCD) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813,EFGH) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE

 

Non working switch:

==================

 

SW01#show radius server-group all
Server group radius
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813) Transactions:
AUTHEN: 0 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server group NPS_RADIUS_SERVERS
SHARECOUNT = 1 SG_UNCONGIURED = FALSE
Type = standard MEMLOCKS = 1
Server(1.1.1.1:1812,1813) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE
Server(2.2.2.2:1812,1813) Transactions:
AUTHEN: 36 Author: 0 Acct: 0
SERVER_AUTO_TEST_ENABLED: FALSE
KEYWRAP enabled: FALSE

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

Can you post both the device show version ? and SNMP config ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

The original post gives us the output of show radius server-group. I believe that it would be helpful if we could see the output of the appropriate parts of show run from both devices.

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card