cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2277
Views
0
Helpful
6
Replies

Recommended software upgrade for WS-C6513

thomas
Level 1
Level 1

Hi There,

I am looking for a stable release, preferably up to date ( 14.4? IOS) version for a 6513 switch running supervisor 720, the aim of the upgrade is to support a WISM card that we are installing, since the current version doesn´t support it. But also I am looking for a stable release that will bring us up to date with our core infrastructure.We run a collapsed Core/distribution in a DC running eigrp,

I would like to know if somebody can have some usefull experience or tips regarding a suitable software image to choose for such an upgrade..the switch runns eigrp, quality of service, some policy routing..sh ver, sh modules below...

Thank you

Martin


Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-JK9SV-M), Version 12.2(17a)SX3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 03-Mar-04 20:36 by cmong
Image text-base: 0x40008FBC, data-base: 0x421CE000

ROM: System Bootstrap, Version 12.2(14r)S9, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-JK9SV-M), Version 12.2(17a)SX3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

IPSOS-NA-CORE-01 uptime is 2 years, 37 weeks, 1 hour, 34 minutes
Time since IPSOS-NA-CORE-01 switched to active is 2 years, 37 weeks, 1 hour, 43 minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 14:39:10 EST Sat Mar 8 2008
System image file is "sup-bootflash:s72033-jk9sv-mz.122-17a.SX3.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
export@cisco.com. WS-C6513 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID SAL0803SY8Q
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
14 Virtual Ethernet/IEEE 802.3  interface(s)
316 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

If

cisco

65536K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.

Configuration register is 0x2102

show module

#sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1115LCFG
  2   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1201BZHS
  3   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1115L9WE
  4   16  SFM-capable 16 port 1000mb GBIC        WS-X6516A-GBIC     SAL0809VC7H
  5   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAD080303VN
  6   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAD080403J0
  7    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD081008US
  8    2  Supervisor Engine 720 (Hot)            WS-SUP720-BASE     SAD081102DY
  9   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL08486CEH
12    8  Network Analysis Module                WS-SVC-NAM-2       SAD072300CL

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  001b.5329.d8c0 to 001b.5329.d8ef  11.1   7.2(1)       8.2(0.56)TET Ok
  2  001e.be51.f678 to 001e.be51.f6a7  11.3   7.2(1)       8.2(0.56)TET Ok
  3  001b.0cd5.9d5c to 001b.0cd5.9d8b  11.1   7.2(1)       8.2(0.56)TET Ok
  4  000f.343b.0db8 to 000f.343b.0dc7   3.0   7.2(1)       8.2(0.56)TET Ok
  5  000f.235a.c600 to 000f.235a.c62f   7.0   7.2(1)       8.2(0.56)TET Ok
  6  000f.2320.3a50 to 000f.2320.3a7f   7.0   7.2(1)       8.2(0.56)TET Ok
  7  000d.2910.31a0 to 000d.2910.31a3   3.1   7.7(1)       12.2(17a)SX3 Ok
  8  000f.237b.b338 to 000f.237b.b33b   3.1   7.7(1)       12.2(17a)SX3 Ok
  9  0012.4302.52c0 to 0012.4302.52ef   2.1   12.2(14r)S5  12.2(17a)SX3 Ok
12  0003.feab.c12c to 0003.feab.c133   2.0   7.2(1)       3.5(1b)      Ok

Mod Sub-Module                  Model              Serial        Hw     Status
--- --------------------------- ------------------ ------------ ------- -------
  5 Cisco Voice Daughter Card   WS-F6K-VPWR-GE     SAD080103K2   1.0    Ok
  6 Cisco Voice Daughter Card   WS-F6K-VPWR-GE     SAD080203DG   1.0    Ok
  7 Policy Feature Card 3       WS-F6K-PFC3A       SAD081009EG   2.2    Ok
  7 MSFC3 Daughterboard         WS-SUP720          SAD08100946   2.2    Ok
  8 Policy Feature Card 3       WS-F6K-PFC3A       SAD081009J6   2.2    Ok
  8 MSFC3 Daughterboard         WS-SUP720          SAD0811015C   2.2    Ok
  9 Centralized Forwarding Card WS-F6700-CFC       SAL08465Y4H   2.0    Ok

Mod Online Diag Status
--- -------------------
  1 Pass
  2 Pass
  3 Pass
  4 Pass
  5 Pass
  6 Pass
  7 Pass
  8 Pass
  9 Pass
12 Pass

6 Replies 6

glen.grant
VIP Alumni
VIP Alumni

   There is no 14.0 code for 6500's . All versions are 12.2 versions . Latest are the 12.2 SXH and SXI versions . You will have to use the feature navigator to  determine which version bests suites your needs and what version supports a WISM .  Also verify you have enough flash and RAM to accomodate the newer versions. The newer versions are a "lot" bigger than the version you are using , some are closing in on 100 meg for file size.

Thanks for your answer, in fact I meant to write 12.4 and not 14.0!!

quote: Thanks for your answer, in fact I meant to write 12.4 and not 14.0!!

No 12.4 either only 12.2 versions .  I would say go with the other poster and go with a safe harbor version that will support your WISM .  Safe harbor testing acceptance usually means it is a stable release version ok to use in almost all circumstances...

Jerry Ye
Cisco Employee
Cisco Employee

You might want to check out the Safe Harbor recommendation page.

http://www.cisco.com/en/US/netsol/ns504/networking_solutions_program_category_home.html

HTH,

jerry

Eric Bretthauer
Level 1
Level 1

I work for an ISP, we've probably got 100 Sup 720's out there running this..

disk0:c7600s72033-advipservicesk9-mz.122-33.SRD4.bin

Do a bug scrub on that, see if there's anything you do with your box that could possibly be affected by known-issues...  

If you read the original post correctly, the original poster is using a Catalyst 6500 not 7600. Hence, the SRD code will not work.

Regards,

jerry

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card