cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2037
Views
50
Helpful
14
Replies

recover Ios 15 on cisco 2960 24 TL

dler.mawlod
Level 1
Level 1

Please who can help me, I have deleted the flash then copied the image flash:c2960-lanbasek9-tar.150-2.SE6 by using xmodem but when I want to boot the Image displays this error message: 

switch: boot flash:c2960-lanbasek9-tar.150-2.SE6
Loading "flash:c2960-lanbasek9-tar.150-2.SE6"...flash:c2960-lanbasek9-tar.150-2.
SE6: magic number mismatch: bad mzip file

regards

2 Accepted Solutions

Accepted Solutions

If you want to load the IOS (BIN file) back to the appliance, then you'll need to read THIS.

View solution in original post

 

ios extension is

c2960-lanbasek9-tar.150-2.SE6.bin

 

thanks

View solution in original post

14 Replies 14

Leo Laohoo
Hall of Fame
Hall of Fame
magic number mismatch: bad mzip file

Means the IOS you're trying to boot is corrupt:  It failed MD5 hash check.

[+5] to Leo.

The IOS which u have downloaded is corrupt.

After u download it, you can check the integrity by running MD5 checksum utility on PC.You can download FastSum utility by doing google.

You can also run the command verify MD5 in switch to check the same.

http://www.cisco.com/c/en/us/td/docs/ios/fundamentals/configuration/guide/15_1s/cf_15_1s_book/cf_md5.html#wp1054104

regds,

aman

Thanks, aman

I tried, but I still have the same problem!!

This discussion has been reposted to the LAN, Switching and Routing community.

MD KAFINUZZAMAN
Level 1
Level 1

Hi dler.mawlod ,

 

You have copped a zip file so first unzip it and copy .bin file which is IOS extension.

 

falsh:c2960-lanbasek9-150-2.SE6.bin

like this extension

 

Thanks

Kafi

Thank you, Kafi,

but, I did it, and I used another Image(c2960-lanbasek9-tar.150-2.SE6.tar), but I got the same problem !!

Hi dler.mawlod,

 

your extension c2960-lanbasek9-tar.150-2.SE6.tar

 

Thnaks

 

 

 

what is the exact switch model u are using?

 

Please share that.

 

regds,

aman

catalyst 2960 series 

the reason for asking correct model is that whether u are downloading the correct IOS for switch.

regds,

aman

If you want to load the IOS (BIN file) back to the appliance, then you'll need to read THIS.

yes. what is wrong ?

thanks

 

ios extension is

c2960-lanbasek9-tar.150-2.SE6.bin

 

thanks

dler.mawlod
Level 1
Level 1

Thanks, you are right , I changed the IOS image with extension .bin

then uploaded successfully

.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: