06-29-2015 02:33 PM - edited 03-08-2019 12:45 AM
Hi, I want to configure C3650 2 switches with redundancy (without stack module / cables ) I'm using only one subnet as DHCP, among switches there will be only one default gateway (switch 1) having DHCP, (switch 2 without DHCP), in this scenario if switch 1 goes down DHCP will not work with standby switch (Switch 2)
attached topology
can any one help me guide the solution :
Solved! Go to Solution.
06-29-2015 04:15 PM
Hi,
In order to provide complete redundancy for your DHCP server, it needs to be connected to both 3650 switches. You also need to stack the switches.
HTH
06-29-2015 04:15 PM
Hi,
In order to provide complete redundancy for your DHCP server, it needs to be connected to both 3650 switches. You also need to stack the switches.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide