Hi
I am trying to configure RSPAN for one of my client. They have Server-Client VTP architecture.
Voice Recording Server is connected to C4507.
Agents are connected to C2960 and C3750.
I got 2 sessions configured and the connectivity is a as follows:
1. Voice Recording Server-----C4507-----C2960-----C2960-----Agent IP Phones (Session 1)
2. Voice Recording Server-----C4507-----C3750-----Agent IP Phones (Session 2)
Recording works with Session-2 but not with Session-1. I understand the problem could be due to multiple reasons:
1.1. C2960 is working in client VTP mode so i cannot add remote span command under the vlan configuration.
1.2. C2960 has LANLITE IOS image which i am not sure if it supports Remote Span.
Looking forward for valuable advices.
R
Ibrahim SAYEED
Solved! Go to Solution.
Hi,
On the 2960 series, you need LAN Base image to do RSPAN.
Here is the config guide:
HTH
Hi,
On the 2960 series, you need LAN Base image to do RSPAN.
Here is the config guide:
HTH
Thanks Reza.