cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
676
Views
0
Helpful
2
Replies

replicate traffic using PBR

suhas_syndrome
Level 1
Level 1

Hi,

my two HO router is connected in MPLS cloud behind HO1 router web server 1 is connected. i want from MPLS cloud any branch (A, B or C) when want to go to WEB SERVER-1. HO-1 router should be replicate that tropic to WEB SERVER-2 which is behind connected to HO-2 router.

1) what acl should be configure on HO-1

2) It need to create Route-Map

3) Or static NAT

lab.png

Regards

Suhas

2 Replies 2

cadet alain
VIP Alumni
VIP Alumni

Hi,

let me try to understand: you want traffic going to webserver1 and in case of failure go to webserver2 ? or you want some traffic going to webserver1 and other going to webserver 2  for load balancing ?

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

Hi,

No i do not want any load balancing, i want  when any branch from mpls cloud access WEB SERVER-1 ip add HO-1 router should be redirect this traffic which has come for WEB SERVER-1 to HO-2 Router and that can access WEB SERVER-2.

which branch from MPLS cloud is accessing WEB SERVER1 should not know that we are accessing HO-2 WEB SERVER.

Regards

Suhas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco