Required power for WS-SVC-NAM3-6G-K9

[k.lapczuk]

Hello,

Does anyone know what is required power in Watts for this card in Catalyst 6500? Or can anyone drop here the "show power" ouput with this card included?

Best regards,

Krzysztof

[Arumugam Muthaiah · Accepted solution]

Hi,

Here is the output of show power from our lab with NAM-3, it requires 370.86W:

Switch#show power
system power redundancy mode = combined
system power total =     4618.32 Watts (109.96 Amps @ 42V)
system power used =      3003.00 Watts (71.50 Amps @ 42V)
system power available = 1615.32 Watts (38.46 Amps @ 42V)
                       Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    WS-CAC-3000W       2771.16 65.98  OK     OK     on
2    WS-CAC-3000W       2771.16 65.98  OK     OK     on
                       Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    WS-C6509-E-FAN      210.00  5.00  OK

                       Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-SVC-NAM-1-250S   121.38  2.89   121.38  2.89  on    on
2    WS-SVC-NAM-3-K9     370.86  8.83   370.86  8.83  on    on
3    WS-X6904-40G        468.30 11.15   468.30 11.15  on    on
4    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
5    WS-X6148A-GE-TX     435.54 10.37   435.54 10.37  on    on
6    VS-SUP2T-10G        435.54 10.37   435.54 10.37  on    on
7    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
8    WS-SVC-NAM-3-K9     370.86  8.83     -     -     on    off (Module  Failed SCP dnld)
9    WS-SVC-NAM-3-K9     370.86  8.83   370.86  8.83  on    on

[k.lapczuk]

Thanks a lot!

Best regards,

Krzysztof