Required Step by Step - HSRP configuration details

[psurendra.ccna]

Dear Team,

Hello,

Qus :

       1. We have one core switch i.e 3560x switch and we configured the switch with 9 Vlan for 9 divisions, each division should not talk            each other even that is also working fine. In each Vlan we enabled dhcp pool.

       2. Recently we procured one more same switch 3560x for 100% redundancy purpose, so please share the configuration details step by step.

Thanks & regards,

Surendra.P

7207886932

[Julio Cesar Brochero Bravo]

in this configuration you need to configure in the host the gateway, that should be that standby ip, that is the virtual IP Sw A (Active) ! interface vlan 20 ip address 172.16.20.2 255.255.255.0 standby 20 ip 172.16.20.1 standby 20 priority 130 standby 20 preempt ! inteface vlan 21 ip address 172.16.21.2 255.255.255.0 standby 21 ip 172.16.21.1 standby 21 priority 130 standby 21 preempt -------------------------------------------------------------------------------------------------------------------- sw B interface vlan 20 ip address 172.16.20.3 255.255.255.0 standby 20 ip 172.16.20.1 standby 20 priority 120 standby 20 preempt ! inteface vlan 21 ip address 172.16.21.3 255.255.255.0 standby 21 ip 172.16.21.1 standby 21 priority 120