cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5237
Views
11
Helpful
14
Replies

Resetting Switch 2 of a former 3850 Stack - Help needed

Cormac Champion
Level 1
Level 1

I have broken a 2 switch stack and now they are two individual units.  But switch 2 still appears to be a switch 2 with interfaces Gi2/0/xx.  If I use the no switch 2 provision ws-c3850-24p command, I get "Error: A switch is already physically present at this location".

How can I reset this switch back to a standalone switch without it needing to be re-connected to the original switch 1 (which I don't have access to)

Thanks in advance

1 Accepted Solution

Accepted Solutions

Dustin Anderson
VIP Alumni
VIP Alumni