08-24-2013 10:42 PM - edited 03-07-2019 03:06 PM
Hello community!
I have Cicso 4506 Chassis (WS-C4506) with a Sup IV (WS-X4515) currently running IOS version 12.2(54)SG1 and ROMMON 12.1(12r)EW.
Prior to upgrading to 15, I am looking to upgrade the ROMMON. The minimum recommended is 12.2(31r)SGA4. I noticed that there is a higher version 12.2(31r)SGA7. I cannot find any docs anywhere that say that I should not use the newer version, but I can't find anything that says that I should either.
Suggestions?
Thanks!
08-25-2013 04:46 AM
Hi,
this may be a trivial answer, but there are release notes for ROMMON as well:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_18983.html
Regards,
Rolf
08-25-2013 04:57 AM
That's a fair question/comment. That page specifically is for WS-X4013+ and 16 With GE. My sup is not quiet that fancy!
So, I think the question stands. Will it work on a 4506+supIV?
Thanks!
08-25-2013 05:09 AM
Ok, that's a valid point. My bad.
In the "Download Software" section you can see the versions applicable to your hardware:
08-25-2013 05:21 AM
Yup, I saw that. So it looks like I can't run the newer version which seems to have resolved some problems?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide