cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
251
Views
5
Helpful
2
Replies

Route-map to change BGP attributes for Specific route

cdegroat82
Beginner
Beginner

Hello,

 

I'm trying to build a route-map that would take a route learned via BGP from an upstream peer, apply a local preference change to just this route, and leave all other routes unchanged.  I've tried a few options in my lab, however it seems to change the route I'm matching via ACL and dropping all other routes I'm assuming due to the implicit deny.  I figured then a prefix list would work but that doesn't seem to be the case either.  Any ideas?  

 

-Chris

1 ACCEPTED SOLUTION

Accepted Solutions

Giuseppe Larosa
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hello Chris,

this is a case for using an empty last block in the route-map

route-map CHANGEONE permit 10

match ...

set ...

route-map CHANGEONE permit 20

 

! emply final clause just to permit all the other routes

 

Hope to help

Giuseppe

 

 

 

 

View solution in original post

2 REPLIES 2

Giuseppe Larosa
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hello Chris,

this is a case for using an empty last block in the route-map

route-map CHANGEONE permit 10

match ...

set ...

route-map CHANGEONE permit 20

 

! emply final clause just to permit all the other routes

 

Hope to help

Giuseppe

 

 

 

 

cdegroat82
Beginner
Beginner

Thank you very much!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: