cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
382
Views
0
Helpful
1
Replies

Route outside Error Details inside

Lost & Found
Level 2
Level 2

Hi,

I 1 Router(Act as Default Gateway 10.34.63.254) Connected to the Switch and 1 Router (ISP Router ) connected also in the switch and workstation.

From Workstation I can ping my ISP Router Inside and outside interface of the ISP router the problem is when i try to ping 8.8.8.8(Google) its not working.

from ISP router I can ping 8.8.8.8 and the next hop IP of the it address which is 121.54.54.17

From Gateway I can ping 121.54.54.18 only but not the next hop.

but when i use the firewall it can ping the 121.54.54.18 also the next hop which is .17

 

Router Default Gateway Config:

ip route 10.34.50.0 255.255.255.255 10.34.50.1

 

ISP Router

p nat inside source static 10.34.50.1 121.54.54.18
ip classless
ip route 0.0.0.0 0.0.0.0 121.54.54.18
ip route 10.34.50.0 255.255.255.0 10.34.63.254
ip route 121.54.54.18 255.255.255.255 10.34.63.254

Please see the attached phote. 

thanks

1 Reply 1

Hi,

The route on DG is wrong "ip route 10.34.50.0 255.255.255.255 10.34.50.1" is directly connected network no need for route. instead use

" ip route 0.0.0.0 0.0.0.0 10.34.50.1" on DG Router

Review Cisco Networking products for a $25 gift card