Hi all,
I would like to do the following architecture with the same C3750 :
network X,Y,Z connected to 3750 in VRF D the 3750 uses a routed interface on subnet E for the default route in VRF D on this routed interface a BYPASS EQUIPMENT the other BYPASS EQUIPMENT interface is connected also to another routed interface on subnet E "also" this routed interface is in another VRF C with other network A and B.
do you know if it will work because of 2 routed interfaces on the same IP subnet or is there a way to do that ?
the only goal for me is to catch traffic from network X,Y,Z on SYN and ACK
thanks
