01-07-2017 02:20 AM - edited 03-08-2019 08:49 AM
HI,
Is any body know how to do Router on a stick on cisco 887va router???
Is this router Support it?
and if its support it please load example
Thanks in Advanced
yaniv
!
Solved! Go to Solution.
01-07-2017 02:40 AM
Hi Yaniv,
Yes it will support router on a stick configuration, which by definition involves sending and receiving traffic down the same interface, ie: not inline.
!
vlan 10
name outside
!
vlan 20
name inside
!
int vlan 10
ip address 192.168.10.254 255.255.255.0
int vlan 20
ip address 192.168.20.254 255.255.255.0
!
int fa0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk allowed vlan 10,20
!
Where router interface fa0/1 connects to a switch.
cheers,
Seb.
01-07-2017 02:40 AM
Hi Yaniv,
Yes it will support router on a stick configuration, which by definition involves sending and receiving traffic down the same interface, ie: not inline.
!
vlan 10
name outside
!
vlan 20
name inside
!
int vlan 10
ip address 192.168.10.254 255.255.255.0
int vlan 20
ip address 192.168.20.254 255.255.255.0
!
int fa0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk allowed vlan 10,20
!
Where router interface fa0/1 connects to a switch.
cheers,
Seb.
01-07-2017 11:57 AM
http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/336-cisco-router-8021q-router-stick.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide