Router Restarting continiously

[syed ethesham ul Hussain]

Hi,

my 3925 router is restarting again and again, it was in rommon mode when i connect it through console.

Attached file show router output.

Kindly suggest

[Leo Laohoo]

---

@syed ethesham ul Hussain wrote:

count: 19,  reason: bus error

---

What module or EHWIC are installed?  

If there is/are, power down the router and remove ALL the HWIC and module.  Power up the line card and see if it makes any difference. 

Also, try another IOS version.

[syed ethesham ul Hussain]

Hi Leo,

Thanks for early response,

This are the router details:

C3945-VSEC/K9	Cisco 3945 Voice Sec. Bundle  PVDM3-64  UC&SEC Lic FL-CUBE25				1
PWR-3900-AC	Cisco 3925/3945 AC Power Supply				1
CAB-ACU	AC Power Cord (UK) C13 BS 1363 2.5m				1
MEM-CF-256MB	256MB Compact Flash for Cisco 1900 2900 3900 ISR				1
SL-39-SEC-K9	Security License for Cisco 3900 Series				1
PVDM3-64	64-channel high-density voice and video DSP module				1
ISR-CCP-EXP	Cisco Config Pro Express on Router Flash				1
FL-CUBEE-25	Unified Border Element Enterprise License - 25 sessions				1
SM-S-BLANK	Removable faceplate for SM slot on Cisco 290039004400 ISR				4
HWIC-BLANK	Blank faceplate for HWIC slot on Cisco ISR				3
C3900-SPE150/K9	Cisco Services Performance Engine 150 for Cisco 3945 ISR				1
SL-39-IPB-K9	IP Base License for Cisco 3925/3945				1
3900-FANASSY	Cisco 3925/3945 Fan Assembly (Bezel included)				1
MEM-3900-1GB-DEF	1GB DRAM (512MB+512MB) for Cisco 3925/3945 ISR (Default)				1
RPS-COVER-3900	Cover for empty 2nd Power Supply slot on Cisco 3925/3945				1
SL-39-UC-K9	Unified Communication License  for Cisco 3900 Series				1
S39UK9-15401T	Cisco 3925-3945 IOS UNIVERSAL				1
VWIC2-2MFT-T1/E1	2-Port 2nd Gen Multiflex Trunk Voice/WAN  Int. Card - T1/E1				1

[Leo Laohoo]

Remove the VWIC2-2MFT-T1/E1.

[syed ethesham ul Hussain]

Thanks Leo,

I will try it and let you know.

Regards,

SYED EHTESHAM