Routing between two subnets.

[chinmoymohanty]

I have two networks,Physicallyconnected .I.e;192.168.0.0 &192.168.1.0,How the communication possible between 2 networks.Where to configure routing.

[amit-singh]

Which device you are using? What's your setup. Explain and we will help you.

-amit singh

[ferryfury]

Hi Mohanthy,

what you need to is to have a layer 3 switch to do this.

hope this helps

rate this post if cleared.

[danielmassey]

Hi,

Inorder to make two Subnet exchange information, we need a L3 Device.

It will be very helpful if you could share your setup

Regard

Danny