Ok - here are a few key factors that relate to my question:
-Every switch is a Cisco Layer 3 Switch (3560G)
-All IP VLANS are defined on the drawing attached to this discussing,
-Every port on ESW605-1 switch has an IP of .3 (on the respective vlans that are defined on the sattellite switches)
Here is my question: Right now, every port on the ESW605-1 switch is on a private VLAN. What I need to accomplish is hitting the 192.168.0.10 and 192.168.0.11 IP's on the ESW-NTP-1 switch for NTP time code.
Since ESW605-1 is already configured with multiple VLANs, how do I pass ONLY NTP traffic from each switch on the ESW605-1 switch from the two NTP time servers on the ESW-NTP-1 switch?
What changes need to be done to the Cisco switches and where do I need to add routes?
Cisco recently announced the availability of the IOS-XE train – IOS-XE Cupertino 17.7.1. This is a standard maintenance release supporting switching, wireless, SP-Access, Routing as well as IoT (Internet of things) platforms with a sustaining support life...
What is AppQoE?
AppQoE is a WAN optimization stack and optimizes WAN traffic for different use cases for applications that are deployed on-prem or in cloud.
What are the benefits of using AppQoE?
AppQoE improves application experience by d...
The application delivery challenges have been the enemy of network since the advent of Internet. So, what are these application delivery challenges that can bring down a network to its heels?
Above are some of the common problems faced not only by tradit...
It is our pleasure to officially announce the finalists in the 2021 IT Blog Awards. Now we are looking to YOU, our amazing tech community, to weigh in. Check out the amazing educational content we've uncovered and vote for your favorites before Friday, Fe...