I have a 2921 with a RPS-Adptr-2921-51 installed and connected to a RPS 2300.
I plugged the router and RPS to 2 different circuits, the router powers up but when I pull the power to the internal power supply of the router, it powers down and doesnt return even with the RPS powered on.
I also notice the "RPS" indicator light on the RPS-Adptr-2921-51 is not lit.
This router is the only device connected to the RPS.
powered both units off plugged in the 2921 to rps plugged in rps to power (left internal power of 2921 unplugged) waited 1 minute, rps and router powered on a minute after that, rps stayed on, router powered off
For years, I have setup IP SLAs and tracked them for different purposes. The problem is that some of the IP addresses that I have been monitoring have actually had outages as well. In comes the Boolean or. It is possible to create multiple SLA...
If you are a network administrator, you know how tedious it can be to manage a mixed-vendor network. There are always differences in how devices are discovered, monitored, configured, and updated. There are also likely to be a variety of management applic...
Redundancy should be built into every network so that in case of a failure, the network remains online. An outage is the last thing that we want to deal with. One of our engineers was recently working on an EEM script that would fail a crypto map ov...
Viptela provides a compelling SD-WAN solution with advanced routing, segmentation and security capabilities for interconnecting complex enterprise networks. Its cloud-based network management, orchestration and overlay technologies make it easy t...