cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

367
Views
0
Helpful
1
Replies
Beginner

samples for redundant trunks on Catalyst 3750 & 3560

Hi,

I've setup a 3750 & 3560 with one "switchport trunk encapsulation dot1q" on port 24 for both Catalyst.

And I'd like to have a redundant trunk to backup this in case of cable or port failure on this.

Hope someone can provide some samples of the Catalyst config for this.

Thanks.

1 REPLY 1
Highlighted
Enthusiast

Re: samples for redundant trunks on Catalyst 3750 & 3560

Hi,

Just config the two ports as an etherchannel, this way if one port goes down you will have second link take over with no downtime.

Guide for configuring etherchannel;

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swethchl.html

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swethchl.html

HTH

LR

CreatePlease to create content
Content for Community-Ad