01-07-2021 03:23 AM
Whilst trying to add a new switch to an existing stack, the new switch keeps rebooting and on further inspection the reason was stated as ““sdm template mismatch”.
Looking at an existing switch in comparison to the new switch it appears that the new switch has “Smart Licensing" instead of "right-to-use", and I believe this may be causing the SDM issue.
I tried to run some commands to switch the license to “right to use” but these were unrecognised on the switch.
01-07-2021 04:35 AM
basic questions:
1 - what platforms are the existing stack members, and what platform is the one you are trying to add? (IE - 3850-48p, 3850-12s, etc)
2 - what version is the existing stack running, and what version is the one you are trying to add.
I'm not really sure from your description that it is a version mismatch, it could be but there's not enough info.
the reason I ask about the types of switches in the stack is because based on the sdm mismatch, that would point to the particular platform. If you issue the command "sho sdm prefer", you will see the by default the pure edge switches (like the 24 or 48 port) use the desktop template, whereas the 12 sfp model will use the distribution template. that is what I suspect is causing the mismatch, but need more info.
01-07-2021 07:22 AM
Both switches are 3850's and I have the auto upgrade command applied to master switch (I ensured that the new switch had a priority of 1). The outputs are as follows:
NEW SWITCH ***********
Switch#sh version
Cisco IOS XE Software, Version 16.09.06
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.9.6, RELEASE SOFTWARE (fc2)
Technical Support: https://clicktime.symantec.com/3NWLiUwC6A8NiUMJcwX88B37Vc?u=http%3A%2F%2Fwww.cisco.com%2Ftechsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 01:57 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
Switch uptime is 1 minute
Uptime for this control processor is 3 minutes
System returned to ROM by Power Failure or Unknown
System image file is "flash:packages.conf"
Last reload reason: Power Failure or Unknown
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://clicktime.symantec.com/3R6BG1tNrNiWswViDoxsGpm7Vc?u=http%3A%2F%2Fwww.cisco.com%2Fwwl%2Fexport%2Fcrypto%2Ftool%2Fstqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
ipbasek9 Smart License ipbasek9
dna-essentials Subscription Smart License dna-essentials
Smart Licensing Status: UNREGISTERED/EVAL MODE
cisco WS-C3850-24P (MIPS) processor (revision AD0) with 832327K/6147K bytes of memory.
Processor board ID FJB2427G00W
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
1611414K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : a4:b2:39:28:5d:00
Motherboard Assembly Number : 73-15805-05
Motherboard Serial Number : FJZ23420ELX
Model Revision Number : AD0
Motherboard Revision Number : B0
Model Number : WS-C3850-24P
System Serial Number : FJB2427G00W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24P 16.09.06 CAT3K_CAA-UNIVERSALK9 INSTALL
EXISTING SWITCH **********
xxxxxxx#sh ver
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 03-Aug-18 23:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
uptime is 1 year, 19 weeks, 6 days, 17 hours, 33 minutes
Uptime for this control processor is 1 year, 19 weeks, 6 days, 17 hours, 36 minutes
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbasek9 Permanent ipbasek9
cisco WS-C3850-48P (MIPS) processor (revision AC0) with 865683K/6147K bytes of memory.
Processor board ID FJB2326H09W
3 Virtual Ethernet interfaces
52 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.
Base Ethernet MAC Address : 6c:5e:3b:f6:af:80
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FJZ23260GZJ
Model Revision Number : AC0
Motherboard Revision Number : B0
Model Number : WS-C3850-48P
System Serial Number : FJB2326H09W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
Configuration register is 0x102
01-07-2021 04:44 AM
Can you post exiting version of code running and also whatis the new device adding to stack version
stacking rule, all should be same model and save version, also check what SDM config was there ?
01-07-2021 07:23 AM
Both switches are 3850's and I have the auto upgrade command applied to master switch (I ensured that the new switch had a priority of 1). The outputs are as follows:
NEW SWITCH ***********
Switch#sh version
Cisco IOS XE Software, Version 16.09.06
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.9.6, RELEASE SOFTWARE (fc2)
Technical Support: https://clicktime.symantec.com/3NWLiUwC6A8NiUMJcwX88B37Vc?u=http%3A%2F%2Fwww.cisco.com%2Ftechsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 01:57 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
Switch uptime is 1 minute
Uptime for this control processor is 3 minutes
System returned to ROM by Power Failure or Unknown
System image file is "flash:packages.conf"
Last reload reason: Power Failure or Unknown
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://clicktime.symantec.com/3R6BG1tNrNiWswViDoxsGpm7Vc?u=http%3A%2F%2Fwww.cisco.com%2Fwwl%2Fexport%2Fcrypto%2Ftool%2Fstqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
ipbasek9 Smart License ipbasek9
dna-essentials Subscription Smart License dna-essentials
Smart Licensing Status: UNREGISTERED/EVAL MODE
cisco WS-C3850-24P (MIPS) processor (revision AD0) with 832327K/6147K bytes of memory.
Processor board ID FJB2427G00W
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
1611414K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : a4:b2:39:28:5d:00
Motherboard Assembly Number : 73-15805-05
Motherboard Serial Number : FJZ23420ELX
Model Revision Number : AD0
Motherboard Revision Number : B0
Model Number : WS-C3850-24P
System Serial Number : FJB2427G00W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24P 16.09.06 CAT3K_CAA-UNIVERSALK9 INSTALL
EXISTING SWITCH **********
xxxxxxx#sh ver
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 03-Aug-18 23:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
uptime is 1 year, 19 weeks, 6 days, 17 hours, 33 minutes
Uptime for this control processor is 1 year, 19 weeks, 6 days, 17 hours, 36 minutes
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbasek9 Permanent ipbasek9
cisco WS-C3850-48P (MIPS) processor (revision AC0) with 865683K/6147K bytes of memory.
Processor board ID FJB2326H09W
3 Virtual Ethernet interfaces
52 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.
Base Ethernet MAC Address : 6c:5e:3b:f6:af:80
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FJZ23260GZJ
Model Revision Number : AC0
Motherboard Revision Number : B0
Model Number : WS-C3850-48P
System Serial Number : FJB2326H09W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
Configuration register is 0x102
01-07-2021 07:47 AM
Both switches are 3850's and I have the auto upgrade command applied to master switch (I ensured that the new switch had a priority of 1). The outputs are as follows:
NEW SWITCH ***********
Switch#sh version
Cisco IOS XE Software, Version 16.09.06
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.9.6, RELEASE SOFTWARE (fc2)
Technical Support: https://clicktime.symantec.com/3NWLiUwC6A8NiUMJcwX88B37Vc?u=http%3A%2F%2Fwww.cisco.com%2Ftechsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 01:57 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
Switch uptime is 1 minute
Uptime for this control processor is 3 minutes
System returned to ROM by Power Failure or Unknown
System image file is "flash:packages.conf"
Last reload reason: Power Failure or Unknown
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://clicktime.symantec.com/3R6BG1tNrNiWswViDoxsGpm7Vc?u=http%3A%2F%2Fwww.cisco.com%2Fwwl%2Fexport%2Fcrypto%2Ftool%2Fstqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
ipbasek9 Smart License ipbasek9
dna-essentials Subscription Smart License dna-essentials
Smart Licensing Status: UNREGISTERED/EVAL MODE
cisco WS-C3850-24P (MIPS) processor (revision AD0) with 832327K/6147K bytes of memory.
Processor board ID FJB2427G00W
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
1611414K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : a4:b2:39:28:5d:00
Motherboard Assembly Number : 73-15805-05
Motherboard Serial Number : FJZ23420ELX
Model Revision Number : AD0
Motherboard Revision Number : B0
Model Number : WS-C3850-24P
System Serial Number : FJB2427G00W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24P 16.09.06 CAT3K_CAA-UNIVERSALK9 INSTALL
EXISTING SWITCH **********
xxxxxxx#sh ver
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 03-Aug-18 23:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)
uptime is 1 year, 19 weeks, 6 days, 17 hours, 33 minutes
Uptime for this control processor is 1 year, 19 weeks, 6 days, 17 hours, 36 minutes
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbasek9 Permanent ipbasek9
cisco WS-C3850-48P (MIPS) processor (revision AC0) with 865683K/6147K bytes of memory.
Processor board ID FJB2326H09W
3 Virtual Ethernet interfaces
52 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.
Base Ethernet MAC Address : 6c:5e:3b:f6:af:80
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FJZ23260GZJ
Model Revision Number : AC0
Motherboard Revision Number : B0
Model Number : WS-C3850-48P
System Serial Number : FJB2326H09W
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
Configuration register is 0x102
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide