Hi all,
I have set up service policies on the VLAN in both input and output directions. I see hits in the output direction but not in the input one. Any reasons as to why this is hapenning?
sh policy-map interface vlan 10
Vlan10
Service-policy input: BW-20M
class-map: Twenty-Mbps (match-all)
Match: access-group name Twenty-Mbps
police :
20000000 bps 500000 limit 500000 extended limit
Earl in slot 5 :
0 bytes
5 minute offered rate 0 bps
aggregate-forwarded 0 bytes action: transmit
exceeded 0 bytes action: drop
aggregate-forward 0 bps exceed 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: any
0 packets, 0 bytes
5 minute rate 0 bps
Service-policy output: BW-20M
class-map: Twenty-Mbps (match-all)
Match: access-group name Twenty-Mbps
police :
20000000 bps 500000 limit 500000 extended limit
Earl in slot 5 :
172852673 bytes
5 minute offered rate 2038968 bps
aggregate-forwarded 167549036 bytes action: transmit
exceeded 5303637 bytes action: drop
aggregate-forward 3382800 bps exceed 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: any
0 packets, 0 bytes
5 minute rate 0 bps
