06-26-2013 08:02 AM - edited 03-07-2019 02:05 PM
The MTU fro one ports on a 6506 was set to 9216. I'd like to set this back to 1500 but the IOS doesn't seem to allow it.
# conf t
Enter configuration commands, one per line. End with CNTL/Z.
(config)# interface gi1/1/24
(config-if)# mtu ?
<9216-9216> MTU size in bytes
Is is possible to switch the port back to 1500?
Solved! Go to Solution.
06-26-2013 08:21 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Have you tried "no . . ."?
06-26-2013 08:21 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Have you tried "no . . ."?
06-26-2013 08:26 AM
I did now
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: