Several L2 Switching upgrade to (+) 1 LLayer3 Switch
I am the IT for a company that has several L2 switches with two Private LANs (I have 3 VLANs because we have also public addresses). There are two default gateways for these LAN. So the scenario:
1 Default VLAN for main LAN (wich has DHCP)
1 Vlan for 2ndary LAN (and a different gateway -> diff router)
1 VLAN for public addresses (same router as 1st, but different interface)
Also I have about three LACP to the Root switch.
And i'm considering arranging a different LAN (+ VLAN) for the Guest WiFi Network.
We are about to change this soon, on a new space (near the old). I want to maintain my star switching schema and i'm considering to implement a new LLayer 3 switch to connect the 2 ISP routers plus several severs, NAS, ETCs and the (old) root switch.
May I LACP (or CIsco LAG) from the old setup? I saw that you can only LACP on default VLAN. But if I need to LACP to the 2nd LAN? Will layer 3 help me?
Hi everyone.I have a problem in my Network.So i have 3 routers and a firewall in my topology. I have configured OSPF and all routers works expect R3 (see in the image below)When I watch my neignbor in R3 it says :192.168.7.7 1 INIT/DROTHER 00:00:37 10.0.2...
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static" approach as oppose to the dynamic and secure approach using&nbs...
good morning I have this report from users, saying that they encounter connection issue only when they are wired , but the wireless I fine. both connection are using the same path to the internet ...please advised a troubleshooting plan.
Enterprise Switching Business Unit is glad to announce Beta release 16.12.3 for all Catalyst 9200/9300/9400/9500/9600. This release is made available to allow users to test, evaluate and share feedback before General Avail...