Several L2 Switching upgrade to (+) 1 LLayer3 Switch
I am the IT for a company that has several L2 switches with two Private LANs (I have 3 VLANs because we have also public addresses). There are two default gateways for these LAN. So the scenario:
1 Default VLAN for main LAN (wich has DHCP)
1 Vlan for 2ndary LAN (and a different gateway -> diff router)
1 VLAN for public addresses (same router as 1st, but different interface)
Also I have about three LACP to the Root switch.
And i'm considering arranging a different LAN (+ VLAN) for the Guest WiFi Network.
We are about to change this soon, on a new space (near the old). I want to maintain my star switching schema and i'm considering to implement a new LLayer 3 switch to connect the 2 ISP routers plus several severs, NAS, ETCs and the (old) root switch.
May I LACP (or CIsco LAG) from the old setup? I saw that you can only LACP on default VLAN. But if I need to LACP to the 2nd LAN? Will layer 3 help me?
Hi!Need to find network devices but not want to open SSH and do show cdp nei, show lldp nei and then need to sh cdp nei gig0/1 det and more.... ?Now You can do from PowerShell.\cdplldp.exe -v v3 -u <SNMPv3 user> -a SHA -w <SNMPv3 authkey> -pp ...
Community Live slides- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Wednesday 11th, December 2019 at 10hrs PDT
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about the Cisco Software-Defined WAN (SD-WAN) solution, its historical roo...
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...