06-10-2015 09:29 AM - edited 03-08-2019 12:29 AM
Hai
Is it possible to connect GLC SX MM 1G to a core with X2 10 G SR .
ALSO SFP 10 G SR to X2 10 G SR
Consider all multi mode.
Thanks
06-10-2015 09:35 AM
Vijay,
Please find the compatibility matrix for the GLX :-
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html
HTH
Regards
Inayath
*Please rate if this is helpfull.
06-10-2015 11:16 PM
Dear All
Thanks for reply.
Is it possible to connect 4500x with sfp plus
10g. To x2 10 G on core.
Both multimode fiber
06-10-2015 11:28 PM
ain features of Cisco 10GBASE SFP+ modules include:
● Smallest 10G form factor
● Commercial temperature (0 to 70°C) only
● Supports 10GBASE Ethernet only
● Hot-swappable input/output device that plugs in to an Ethernet SFP+ port of Cisco platforms
● Provides flexibility of interface choice
● Supports digital optical monitoring capability
● Cisco quality identification (ID) feature that enables a Cisco platform to identify - optics supported by Cisco technology
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
06-10-2015 09:49 AM
Hi no you cannot interconnect these transceivers
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: