01-10-2017 01:30 AM - edited 03-08-2019 08:51 AM
Hi,
I've got to ship two SG200-26 to a branch to connect to connect two floors. These floors are connected via fibre optic. But there up to now is no technician at this location so I don't know which type of fibre it is (SM, MM, 50 or 62,5). And I want to prepare everything as soon as possible. Is there any kind of SFP device for this switch, which is feasible for all kinds or which at least covers the most usable types of fibre?
Thanks,
Stefano
Solved! Go to Solution.
01-10-2017 03:45 AM
if you were using catalyst I would say your using multi-mode due to the distance not single and if its multi-mode its most likely lc-lc om3 but your using smb switches which are not that standard compared to the glc-sx-mm the closet I can see would be the MGBSX1
GLC-SX-MM= |
1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector |
http://www.cisco.com/c/en/us/products/collateral/switches/small-business-200-series-smart-switches/data_sheet_c78-634369.html
Table 4. MFE and MGE Transceiver Ordering Information
01-10-2017 03:45 AM
if you were using catalyst I would say your using multi-mode due to the distance not single and if its multi-mode its most likely lc-lc om3 but your using smb switches which are not that standard compared to the glc-sx-mm the closet I can see would be the MGBSX1
GLC-SX-MM= |
1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector |
http://www.cisco.com/c/en/us/products/collateral/switches/small-business-200-series-smart-switches/data_sheet_c78-634369.html
Table 4. MFE and MGE Transceiver Ordering Information
01-10-2017 07:18 AM
Good answer, now I know what I have to consider. Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide