cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
2
Replies

SFP module number

bapatsubodh
Level 1
Level 1

Hi,

Output for show int gig x/y shows the following output what type of module is installed ?

GigabitEthernet0/49 is up, line protocol is up (connected)

  Hardware is Gigabit Ethernet, address is 0022.bd97.34b1 (bia 0022.bd97.34b1)

  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  Keepalive not set

  Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseCX SFP Cable ---------------> what type of module is this one?

  input flow-control is off, output flow-control is unsupported

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:00, output 00:00:23, output hang never

Pls. share the experience.

Thanks,

Subodh

2 Replies 2

bapatsubodh
Level 1
Level 1

Or is it a cable (patch chord) with SFP modules attached at the end. So we need to just plug these in the switch.

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Hi ,

Please run the following command and this will show you the exact SFP part details.

show int G0/49 capabilities

* This output of this command will have the SFP model details.

HTH

Regards

Inayath

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: