cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
295
Views
0
Helpful
1
Replies

SFP Necessary for Catalyst 3750

HIo,

I have a stack with two 3750 Catalyst.We currently have four ports TenGiga ports of which we are  using two. I wonder if i could use the another two free ports to connect with a EMC. I would like to connect the ports Te3/0/2 and Te4/1/2 to an EMC storage .  The port 3/0/2  has a SFP trasceiver but port 4/1/2 not. we would need to buy a SFP for port 4/1/2. What SFP should buy ( partnumber ) for Te4/1/2?.

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    3 30    WS-C3750E-24TD     12.2(53)SE2           C3750E-UNIVERSALK9-M

     4 54    WS-C3750X-48       12.2(53)SE2           C3750E-UNIVERSALK9-M

NAME: "TenGigabitEthernet3/0/1", DESCR: "10GBase-SR"

PID: X2-10GB-SR        , VID: V01  , SN: OE28002940

NAME: "TenGigabitEthernet3/0/2", DESCR: "10GBase-SR"

PID: X2-10GB-SR        , VID: V01  , SN: OE28002804

NAME: "TenGigabitEthernet4/1/1", DESCR: "SFP-10GBase-SR"

PID:                   , VID: V00  , SN: ECL1446013N

On  the other hand , in the link I found the device ws-  C3750X -48 ( cat4 ) only support SFP -10G- SR ( dual LC connector ) ,  while teams WS - C3750E - 24TD ( cat3 ) support both modules X2 -10GB- SR and SFP- 10G- SR .

Can you confirm me this ? I

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html#wp48759

Thanks a lot

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame
1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: