Hello,
I'm hoping someone could shed light on why is SG550XG-8F8T switch reporting 469 interfaces:
# snmpwalk -v1 -c ******* $switch_ip_address .1.3.6.1.2.1.2.1
IF-MIB::ifNumber.0 = INTEGER: 469
Interfaces status on the switch itself (starting from 16th port, with many ports omitted with [...]
#show interfaces status detailed
te1/0/16 10G-Fiber Full 10000 Disabled Off Up Disabled Off
te1/0/17 -- -- -- -- -- Not Present -- --
te1/0/18 -- -- -- -- -- Not Present -- --
te1/0/19 -- -- -- -- -- Not Present -- --
te1/0/20 -- -- -- -- -- Not Present -- --
[...]
te2/0/10 -- -- -- -- -- Not Present -- --
te2/0/11 -- -- -- -- -- Not Present -- --
te2/0/12 -- -- -- -- -- Not Present -- --
te2/0/13 -- -- -- -- -- Not Present -- --
te2/0/14 -- -- -- -- -- Not Present -- --
[...]
te8/0/50 -- -- -- -- -- Not Present -- --
te8/0/51 -- -- -- -- -- Not Present -- --
te8/0/52 -- -- -- -- -- Not Present -- --
I'm seeing all of those interfaces when querying for other SNMP OIDs with snmpwalk as well.
Web interface is correctly showing 16 interfaces / physical ports only.
Thank you!
