cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
0
Replies
Highlighted
Beginner

Simple routing questions for SRP547W

I have a SRP547w with 2 active interfaces

WAN2 (Ethernet) 192.1.3.3 

LAN (VLAN1,Ethernet) on 192.168.103.1

Also have got an access point on the LAN 192.168.103.2 which can ping from the router. The router has the static route table below

Routing   Table

Destination     LAN IP


Subnet     Mask


Gateway


Interface

192.168.100.0

255.255.255.0

--

VLAN100

192.168.103.0

255.255.255.0

192.168.103.1

VLAN1

192.1.3.0

255.255.255.0

--

WAN2

239.0.0.0

255.0.0.0

--

VLAN1

0.0.0.0

0.0.0.0

192.1.3.5

WAN2

My PC is IP 192.1.3.240 with Gateway set to 192.1.3.From my PC not get a response from any of the following :-

     ping 192.168.103.1     -                                              request timed out

     ping 192.168.103.2     -                                              request timed out

     http://192.168.103.1:8080 -                                        in browser - no page

     http://192.168.103.2                                                  in browser - no page

However I do get a positive response to :-

     ping 192.1.3.3

     http://192.3.3.1:8080

"Any IP" is set for Allowed Remote IP address in Web Access Management.

Any help or comments much appreciated.

0 REPLIES 0
Content for Community-Ad