Single Fiber Strand Gigabit SFP Connect... - Cisco Community

358

Views

0

Helpful

0

Replies

Highlighted

Is there an SFP that I can use to create a Gigabit link over a single strand of single mode fiber optic cable over a 15 Mile Distance. I can lease dark fiber between 2 locations about 15 miles apart, but leasing 2 strands is proving to be cost prohibitive, but 1 strand only could be financially feasable. I know Cisco makes the BX SFP's that can do this, but they can only go about half the distance I need. Is there another SFP I can use for this application that will work over one strand and at this distance? Ideally I would like to just have a 2960-S Switch at each end of the link with this SFP.

Any Thoughts?

Jim

Latest Contents

Cisco 2509-RJ terminal server freezes during startup

Created by hugosilva624511431 on 11-13-2019 08:57 AM

1

0

1

0

Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ... view more

Cisco Digital Network Architecture Center Modules (Design M...

Created by Mohamed Alhenawy on 11-10-2019 10:24 AM

0

0

0

0

Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con... view more

Network Automation Solution : How to save configuration file...

Created by KrishnaTiwari8030 on 11-03-2019 04:15 AM

0

0

0

0

import netmikofrom netmiko import ConnectHandlerdevice = ConnectHandler(device_type="cisco_ios", ip="DEVICE IP", username="USERNAME", password="PASSWORD")output1 = device.send_command("show running-config")save_file = open("Switch_running.txt","w")save_fi... view more

ENCS Design and Deployment Best Practice

Created by kramesh on 11-02-2019 04:17 PM

0

0

0

0

Connectivity Design considerations and recommendation 1.Management Access connectivity If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port. If OOB path is not available, Connect the dedicated Management port to LAN Swi... view more

Cisco Digital Network Architecture Center Modules (Design Mo...

Created by Mohamed Alhenawy on 11-02-2019 10:30 AM

0

0

0

0

Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a... view more

CreatePlease to create content