Have an SLM2008 Smart Switch(running ver 2 firmware) in a small network with file/media server, router and several PCs. It replaced a generic 8-port 100MB/s unmanaged switch. Main reason for changeover was to get access to 1GB/s speed.
The SLM2008 is VERY slow. Media streaming between server and media streamer is particularly bad and video freezes often. File transfer and internet also very slow. Going back to old switch is much faster, despite lower bandwidth.
Assume problem is setup of the SLM2008? Anyone got any ideas?
Noticed the SLM2008 is also very power thirsty of gets considerably warmer during operation than the old generic switch. Is this a tradeoff of 1GB/s switches or is the SLM2008 just hungry?
I bought the switch a week ago and have similar problems. The internet speed is good, but internal traffic is slow. Both Mac's run GB-LAN. I updated the firmware, what else can i do?
Interesting. I thought the idea of a manufacturer's support forum was to post answers to questions for access by the global IT community. Seems they are more for users to share their experiences with poorly supported product.
Maybe somebody from Cisco will evntually post an answer to the problem. Until then Cisco is off the list of recommended Ethernet equipment in our company.
Any news on the above topic ?
Some of our retailers complain about the same problem.
Can you recommend some faster type ?