Not sure if this could be discussed here, but I'll try
Iam trying to configure a solution based on SMB products on ccw, using the configuration tool, or opening an oip as well. For some reason products such as sd208p are not showing up in any way. Can these be configured on the ccw or not?
I'm not sure if you mean CCW (Cisco Commerce Workspace)?
CCA is the only supported tool for most small business product, which is primarily designed for the UC500 but works well with the SX300, ESW500 series switches. Any other tool may or may not work but is considered unsupported.
Also keep in mind the SD208 is an unmanaged switch. There isn't any configuration to the device.
Please mark answered for helpful posts
Hello!I make syslogcollector + RESTAPI for collect syslog messages.It have next iterested features:1. Can recognise header from Cisco/Moxa and more devices and write it in dedicated field2. Have API for integrated with other tools3. Work with Mongodb4. We...
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...