04-24-2008 03:56 PM - edited 03-05-2019 10:36 PM
I have an SNMP community string that is incorrect on a Cisco 2811 router. I can't seem to change the snmp-community name. What are the commands to change the name?
04-24-2008 07:55 PM
Hi James,
The commands to change the SNMP community string is as follows.
Router(config)#no snmp-server community xxxx
where xxxx is current community string
Router(config)#snmp-server community yyyy
where yyyy is the new community string.
Pls follow the below mentioned link. It will give you a better understanding.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml#modifysnmp
*Pls Rate if it Helps*
Rgs,
Jack
04-25-2008 02:25 AM
Jack,
Thanks. I was able to change the string and enter the new community name. I didn't realize it was so easy...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide