cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1676
Views
0
Helpful
1
Replies
gururajan
Beginner

snmp oid for cisco 1900

Hi

Can you help me to get the Snmp OID for polling the in and out utilization for the CIsco 1900 Series Router interfaces.

1 ACCEPTED SOLUTION

Accepted Solutions
cadet alain
Advisor

Hi,

1° enable this feature for the ifindexes to persist between reboots:http://packetlife.net/blog/2010/apr/22/snmp-interface-index-persistence/

2° get these indexes with sh ifmib ifindex to retrieve the ones for  your serial interrfaces.

3° eg you want ingress octets on serial1/0 which has ifindex 2 so  the MIB objcet is ifentry.2. ifInOctets

    look here for OIDs:http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=ifEntry&submitValue=SUBMIT

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

1 REPLY 1
cadet alain
Advisor

Hi,

1° enable this feature for the ifindexes to persist between reboots:http://packetlife.net/blog/2010/apr/22/snmp-interface-index-persistence/

2° get these indexes with sh ifmib ifindex to retrieve the ones for  your serial interrfaces.

3° eg you want ingress octets on serial1/0 which has ifindex 2 so  the MIB objcet is ifentry.2. ifInOctets

    look here for OIDs:http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=ifEntry&submitValue=SUBMIT

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post