cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
469
Views
0
Helpful
1
Replies
Highlighted

SNMP trap send every 30 seconds

I have a snmp trap sent every 30 seconds from one of my cisco switches (a stack of 3750 to be precise):

ccStatusMemberStatusChange

Do you know what it is and why it is sent continuously??

Thank you for your answers.

Flo

1 REPLY 1
Highlighted
Advocate

Flo,

If you are receiving this message constantly from your

switch stack you need to investigate further.

Sounds like a switch is not connecting properly

ccStatusMemberStatusChange ccMemberOperStatus = active(1)

Cluster member active, messages received by command switch

Informational

Network Element

None

ccStatusMemberStatusChange ccMemberOperStatus = inactive(2)

Cluster member inactive, messaged failed to be received by command switch

Informational

Network Element

None

Use the guide at this link link

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/configuration/guide/swstack.html#wp1284240

Or find the guide for your version of IOS

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_installation_and_configuration_guides_list.html

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Content for Community-Ad