cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
503
Views
0
Helpful
1
Replies

SPAN on cisco c9200 to nexus 3500 c3548

Hi Expert,

 

I can not pass SPAN network traffic.
my sources switch model cisco c9200 and collector switch is nexus 3500 c3548.Is there any solution? Please refer my configuration below..please correct me if I am wrong.

AC01
*****

monitor session 1 source interface gi1/0/46
monitor session 1 destination interface gi1/0/2

 

AC02
******
monitor session 1 source interface gi1/0/46
monitor session 1 destination interface gi1/0/2

 

DR01

*****
monitor session 1
source interface Ethernet1/20
destination interface Ethernet1/41
no shut

monitor session 2
source interface Ethernet1/20
destination interface Ethernet1/42
no shut

int Ethernet1/41
switchport monitor
exit


int Ethernet1/42
switchport monitor
exit

DR02
*****
monitor session 1
source interface Ethernet1/20
destination interface Ethernet1/41
no shut

monitor session 2
source interface Ethernet1/20
destination interface Ethernet1/42
no shut

int Ethernet1/41
switchport monitor
exit

int Ethernet1/42
switchport monitor
exit

 

I attach my network topology. I really appreciated your help on this issue.

Thanks

@Mark Malone ,please assit me..thank you.

1 Reply 1

Mohsin Alam
Cisco Employee
Cisco Employee

Hello, 
Are you talking about RSPAN or Local SPAN? 
Check this config guide for the same: 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-9/configuration_guide/nmgmt/b_169_nmgmt_9200_cg/configuring_span_and_rspan.html





## Make sure to mark post as helpful, If it resolved your issue. ##
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: