cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
135
Views
0
Helpful
2
Replies
M-H Beginner
Beginner

spare power connectors for the industrial switches ?

Can anyone identify the connectors/wire headers used on the IE3300 switches and its powersupplies?

I can't find any specifics in the cisco documentation today, but a rather general referral to 'molex'

Also Cisco does not list them as spare part.

Searching them based on pictures on the internet does not give me any quick success.

I need a few spares of each to equip my lab , and I would like to create some reuseable documentation to help others to find this information.

M-H

Everyone's tags (1)
2 REPLIES 2
Highlighted
Advocate

Re: spare power connectors for the industrial switches ?

Hi @M-H ,

 

To energize these switches you must connect the cables directly to the device.
The "molex" type connector is used to connect to the alarm circuit pins.

12.jpg

 

I leave you these reference links:

https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3X00/Hardware/installation/guide/ie3X00_hig/REV-HIGINSTL.html#56455

https://www.revolvy.com/page/How-to-Configure-Cisco-IE1000-Series-Switch-Using-Express-Setup?stype=videos&cmd=list&sml=2ZBpRc1Rjqs&cr=1

 

Regards

M-H Beginner
Beginner

Re: spare power connectors for the industrial switches ?

Hi Luis_cordova,

 

The connectors for power can be disconnected too, they are similar but just 2 pole.

For the 3000 series I found spare part PWR-IE3000-CNCT that is available from many dealers.

However for the IE3300 series , I have not found any spares up till now.

 

Also I rather know the connector manufacturer , and its type number, so we can order it in bulk at regular prices.

M-H

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards