I am trying to setup 2 vlans (vlan 75-native, and vlan 76-voice) using SR520 and ESW520-24 port switch. By default vlan 75 comes loaded in the SR520 and vlan1 comes loaded by default on the ESW520.
Port 24 on the ESW will be connecting to a ISP MPLS circuit (LAN IP 192.168.2.1) connecting to a remote site where the IP PBX (Avaya IP office) resides with call server.
I have configured SR 520 router with internet on FE4 (WAN Port) Port F3 is set to switch mode and connects to ESW on port 23 with is a truck port. When I change F3 to smart tag switch mode I lost connectivity to switch (why is this)
IP VOIP phone connect to ESW switch with a router IP of MPLS (192.168.2.1) manually configured.
How do I ensure that the SR router vlan 75 handles data on 192.168.2.42 as gateway, with DHCP to Data clients and Vllan 76 handles VOICE on 192.168.76.X with IP information options with gateway 192.168.2.1
Please give you insight, I have tried many option but the phones are not connecting to primary site.
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...