ssh enabled but telnet service port (23/tcp) still on

[Ken Lee]

Hi

ssh enabled, but telnet service still on when doing "telnet 10.4.255.1  23" . Not sure why it is so, I presume it is because of line vty 5 15 below ? Need some advice on this. Thanks.

------------------------------

line con 0
exec-timeout 5 0
login

line vty 0 4
access-class 120 in
exec-timeout 5 0
login local
transport input ssh

line vty 5 15
no login
no exec

----------------------

Thanks in advance.

[devils_advocate · Accepted solution]

Try transport input ssh on your 5 through 15 vty lines.