cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1240
Views
0
Helpful
4
Replies

Stacking 2960S switches options

Phuong Trinh
Level 1
Level 1

I have 2  Catalyst 2960S (24 ports and 48 ports). Can I stack them using the Uplink connection instead of the stack modules. I know Stack module is the best option but it is kind of expensives (half price of the 24 ports switch) and I only need to stack no more then 2 switches.

Thanks

Phuong                

2 Accepted Solutions

Accepted Solutions

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Phuong,

no you cannot use uplink to build a stack, stacking requires stacking modules and flexstack cables.

using the uplink ports you can only create a cluster that is only for administrative purposes

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swclus.html

>>

A switch stack is different from a

switch cluster

.  A switch cluster is a set of switches connected through their LAN  ports, such as the 10/100/1000 ports. For more information about how  switch stacks differ from switch clusters, see the "Planning and  Creating Clusters" chapter in the

Getting Started with Cisco Network Assistant

on Cisco.com.

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swstack.html

Hope to help

Giuseppe

View solution in original post

AhmedSonba
Level 1
Level 1

Hello Phuong

You can do it by using FlexStack In order for the switches to stack, a  separate FlexStack module must be  inserted in the rear of the switch.  Without this module, FlexStack  cannot function.

Please refer to the following link for more information

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html

Hope it will help

Ahmed Sonba

View solution in original post

4 Replies 4

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Phuong,

no you cannot use uplink to build a stack, stacking requires stacking modules and flexstack cables.

using the uplink ports you can only create a cluster that is only for administrative purposes

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swclus.html

>>

A switch stack is different from a

switch cluster

.  A switch cluster is a set of switches connected through their LAN  ports, such as the 10/100/1000 ports. For more information about how  switch stacks differ from switch clusters, see the "Planning and  Creating Clusters" chapter in the

Getting Started with Cisco Network Assistant

on Cisco.com.

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swstack.html

Hope to help

Giuseppe

AhmedSonba
Level 1
Level 1

Hello Phuong

You can do it by using FlexStack In order for the switches to stack, a  separate FlexStack module must be  inserted in the rear of the switch.  Without this module, FlexStack  cannot function.

Please refer to the following link for more information

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html

Hope it will help

Ahmed Sonba

OK, got the message, I will get the stack modules. Thanks for all of the responses.

-Phuong

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Considering the expense of the stack modules, you might want to carefully consider if the features provided by stacking are worth their cost for your usage.  For just a stack of two, a multi gig Etherchannel might satisfy your needs.

Review Cisco Networking for a $25 gift card