02-06-2007 11:05 AM - edited 03-05-2019 02:11 PM
Hi Experts,
I'm experimenting with stacking two catalyst 3750's ver 12.2(25)SEE1 and 12.2(25)SEB4. The 12.2(25)SEE1 became the stack master and overwrote code on my ver SEB4 switch. Is there a way to get my original IOS version and codes back onto my 12.2(25)SEB4 switch w/o having to blow it away.
thanks
02-06-2007 03:18 PM
If you have one particular switch you want as master , you have to give it a priority of 15 . If there was enough room in flash the old version should still be there , just do a "dir flash1: or dir flash2: and see if you can locate it . If its still there you can probably discconect the stack cables console in and delete the 12.2.25 SEE1 image and reboot the switch . SEE1 is newer so it picked that code and loaded it , not sure why you need the older code .
02-09-2007 09:10 AM
Correct command to delete flash file?
file name <2 -rwx 7205024 date c3750-ipbasek9-mz.122-25.SEE2.bin>
This same file reside on both flash directories and there are several others with a copy of each in both flash directories.
Will I need to delete the file in question from both directories?
Will switch automatically revert back to previous flash file?
02-09-2007 10:43 AM
hi there...
interesting link to read though :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide