Hi Lond,
what i would suggest is, jus issue a command "show standby" for the router you hav got access. with that you can come to which router is Active & which is Standy. it should be mentioned something like this....
Vlan5 - Group 5
Local state is Standby, priority 110, may preempt
Hellotime 5 sec, holdtime 15 sec
Next hello sent in 0.008
Virtual IP address is 10.2.9.252 configured
Active router is 10.2.9.251, priority 111 expires in 11.176
Standby router is local
34 state changes, last state change 1w3d
IP redundancy name is "hsrp-Vl5-5" (default)
this configuration which i have mentioned is for the switch, similar kind of thing will be for router also.