cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4165
Views
10
Helpful
9
Replies

Static route deletion impossible on Nexus 7010

Thibault BRISSE
Level 1
Level 1

Hi,

I am working on Nexus 7010 with NX-OS 5.1.5. I have to delete the static route 10.10.0.0/16 via 10.16.0.21

####################################################

FRLNCSNEX1# sh ip route static

IP Route Table for VRF "default"

'*' denotes best ucast next-hop

'**' denotes best mcast next-hop

'[x/y]' denotes [preference/metric]

10.10.0.0/16, ubest/mbest: 2/0

    *via 10.10.16.1, Vlan750, [1/0], 00:44:42, static

    *via 10.16.0.21, Vlan3, [1/0], 02:23:44, static

####################################################

I try to remove the route with the command "no ip route 10.10.0.0/16 10.16.0.21" and I have the message below :

% Route not deleted, it does not exist

I don't understand why I have this message because the static route exist.

Do you have an idea ?

Thank you,

Thibault

9 Replies 9

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Try deleing it from the vrf

vrf  context  vrf-name

then

no ip route 10.10.0.0/16 10.16.0.21

HTH

Hi,

This static route isn't part of any vrf but I also try with the default vrf and I have the same message.

Thank you,

Thibault

This command should show only global routing table. what does your show run says ?

Hi,

the reason I said use the vrf because I see vrf default in your sh ip route static output:

IP Route Table for VRF "default"

or vrf default is global?

HTH

Hi,

I think vrf default is global. In either case  it doesn't work

Thank you

Thibault

Can you post the following output:

show run | i route

I just want to verify if your static route is configured with outgoing interface first. If yes, you have to remove the static route like the following:

no ip route x.x.x.x/x intf x.x.x.x

HTH,

jerry

Hi,

Ok I give you the output very soon but it's me who added the static route with classical command ip route x.x.x.x/x x.x.x.x.

Thank you,

Thibault

Hi,

The output of the sh run | inc route command is :

ip route 10.10.0.0/16 10.10.16.1

ip route 10.10.0.0/16 10.16.14.6


Thank you,

Thibault

Hi,

I succeeded to delete the static route 10.10.0.0/16 10.16.14.6.

To do this I execute the following command :

ip route 10.10.0.0/16 10.10.16.1

ip route 10.10.0.0/16 10.16.14.6

!

no ip route 10.10.0.0/16 10.10.16.1

no ip route 10.10.0.0/16 10.16.14.6

Thank you for your help.

Thibault

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card