cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5028
Views
0
Helpful
2
Replies

Storm control on trunk ports - good idea?

bridgepartners
Level 1
Level 1

We have around a dozen Catalyst 3560 and 2960 switches in a ring topology. We are considering adding storm control to our trunk ports. Up until now we have only used it on edge ports with default values and without error-disable.

I am proposing that we also add storm control to trunk ports at a lower level and that we error-disable only the redundant links that make up our loops.

storm-control broadcast level 25.00 20.00

storm-control multicast level 2.00 1.00

storm-control action shutdown [only on redundant links]

In a storm all links will restrict broadcast which should help accessing remote switches, but the redundant links should errdisable and block the redundant path. It is important that the action line is not applied to links that are not redundant as we could isolate parts of the network.

Does anyone know of a reason not to use storm control on trunks? Also, I would be interested in views on the level I have suggested (25%).

Kind regards

Daniel

2 Replies 2

bridgepartners
Level 1
Level 1

Is anyone else using strorm control on trunk ports?

My storm control is on the access port.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: