Storm control

[tahseen12]

Does Cisco routers or L3 switches support

storm control on L3 interfaces???

[mbroberson1]

Hi Tahseen12,

Storm Control is a L2 technology and available only on L2 switchports. However if your needed a similar feature for L3 interfaces I would suggest you look at "boradcast suppression" which is supported on L3 intercaces.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/bcastsup.html

Please rate if this helps.

Regards