cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
480
Views
0
Helpful
1
Replies

Suggestion with selection of 10 Gig port on ASR 1002

ramkunta
Beginner
Beginner

Hello every one,

I am considering ASR 1002 as WAN router and WAVE 7541 as WAAS device.

I have to connect 7541 to 1002 on a 10 Gig port.

I  understand SPA-1X10GE-L-V2 can be used if the connectivity is LAN and  SPA-1X10GE-WL-V2 should be used if it LAN/WAN connectivity.

Can you please suggest if it is okay to use  SPA-1X10GE-L-V2 on ASR in this scenario since it is only LAN connection? Kindly suggest.

I have gone through these two data sheets, but it is not making much sense from this perspective, hence the request.

http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd804dc62d.html

http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd80715dc5.html

Thanks and Regards,
Ram

1 Reply 1

Reza Sharifi
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hi,

That is correct. If you are connecting to your internal network, you should use SPA-1X10GE-L-V2.

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers