cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
428
Views
0
Helpful
2
Replies

SUP2T VSS- Mixing number of Supervisors

bimckenz
Level 1
Level 1

Can you have 2 Sup2Ts in one chassis and one Sup2T in another in VSS?

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

No it should be one and one or 2 and 2

HTH

Sent from Cisco Technical Support iPhone App

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Perhaps not good practice (to do that intentionally), but if you have a IOS that supports quad VSS, it should function with one of the four sups down, so I would expect it to work with only three installed.

Review Cisco Networking for a $25 gift card