sup720 3bxl cannot boot with SXJ1 image

[zhenningx]

I have a SUP720 3BXL module. It can boot with the s72033-ipservicesk9_wan-mz.122-33.SXI4a.bin image but cannot boot with the s72033-adventerprisek9_wan-mz.122-33.SXJ1.bin image.

It just stuck at:

Self decompressing the image : ################################################################################################################################################################################################################################ [OK]

Any ideas?

Thanks.

[Leo Laohoo]

Did you try and compare the MD5 hash value of the file you've downloaded against the MD5 hash value found in the Cisco website?

If I remembered correctly, SXJ requires a DRAM and flash/bootflash of 512.  It doesn't discriminate whether or not you've got "XL".  

[zhenningx]

Yes the MD5 value matches and I am trying to boot from disk1.

Thanks.

[Leo Laohoo]

Can you boot the IOS from sup-bootflash: or disk0:?

[zhenningx]

No, cannot boot from neither sup-bootflash: nor disk0:.

Previously I said I can boot SXI4a, but now I cannot boot SXI4a either. The same symptom, stopped after "Self decompressing the image : OK". The register is set to 0x2102.